Journey of Discovery

I want to thank you for finding my technology web page and reading about my work. My enclosed patents and pending applications are not all that meets your eye in a sense that there is much more than what is perceived initially. Many people can read my patent work and say simply “It’s just another Thermoelectric device”, their assumptions are far from the reality of what is occurring in my patent work. Since my work began in 1999 and prior, I have searched for answers to why this seemingly simple heat to electrical energy produced extremely high electrical power in the range of 94% efficiency using propane as fuel. This quest to find answers has put me on a journey of discovery for nearly 25 years. My area of research in this quest has been in the connecting thermoelectric interfaces as the 5,000 Watt first prototype had a total electrical  reading of:  Resistance .00167   Voltage 3   Current 1,800   Power 5,400  Watts Plus or Minus. The soldered joints used have very low repeatability issues because the solders react to the high current created in the furnance bonding process of the Thermoelectric. This high current bonding occurs in two different metals being soldered or welded. It is called a “missed joint” effect that pushes the molten bonding metal away from the joint being welded, especially in Thermoelectric assemblies. A soldered joint is more like glue than a metallurgical bond of two metals. In order to solve this problem I tested and discovered my Fusion Process found in my patent US10,096,761 and US10,937,940 . The fusion process electrical Joint resistance was extremely low, so low that it is very difficult to detect any resistance. When I calculate Ohms Law the power that can be produced is extraordinary theoretically, I say theoretically because there are other factors that need be considered such as the work function of metals and the elements’ capacity to conduct current are all reasons that further research is needed to produce materials that minimize these down-sided technical facts. The fusion process has introduced other production problems in keeping these metals together. My basement and yard workshop lacks the needed equipment to go into production and I lack proper funds to move this technology further. There is also the Pulse Width Modulator with a shorted wave form that also increases the electrical power output. My electronics has been tested by scientists in Europe and was found to increase electrical power production by 200% over steady-state conduction. This is due to the sudden pulse that is create,d transforming all electrical power in a Thermoelectric Generator to Magnetics that Transformers love. Power is removed by the secondary windings. It is very difficult to remove power from a Thermoelectric Generator using steady state topography, the shorted wave form solves this problem. This type of electrical configuration of circuits is not used as all electronic engineers say the electronic FET switch will burn up instantly upon starting the circuit. I’m glad I’m a scientist and not an Engineer, I know better as Ohms law tells me so and is clear that in a shorted circuit, Voltage is reduced to zero, Magnetics can become infinite and the Upconverter Transformer removes the power in the secondary winding. The square wave duty cycle with two opposing banks of FET switches oscillate in the nanosecond range and does not have time to burn the electronic switches. The result is total power removed from the Seebeck Thermoelectric device.

I further researched using Room Temperature Super Conducting Polymers of the Russian Scientist Leonid N. Grigorov. Upon building a Thermoelectric Generator, I coated all Hot and Cold Elements and P-Type and N-Type semiconductors with a dissolved polymer. I treated the polymer to make them electrically conductive in a guess that the generator would produce higher output. I worked on assembling this Thermoelectric Generator for several months producing conductive polymer coating on all the generator parts. Then came the time of truth. I lit the burner of the Thermoelectric Generator and was happy that it was producing electrical power. As the temperature increased in the elements, the power suddenly went to zero. It was clear that Scientist Grigorov was spot-on as he states in his patent work that the conductive polymer threads (Cooper Electron Pairs) cannot work at elevated temperatures because the conductive electron threads are broken as the polymer melts. I understood this from the start but being the kind of guy that I am it was clear that I needed to try these conductive Polymers in my Thermoelectric Generator. I stood watching many months of work going up in smoke. In spite of my disappointment, I turned up the propane gas even higher thinking that if my experiment was crashing and burning literally, I wanted to destroy the generator completely. The generator smoked and started to carbonize the coated polymer and to my surprise the generator again put out electrical power. This sudden discovery started me on another research path to find yet other reasons why this was occurring. Soon it became clear to me that the generator was transforming the coated polymer into Turbo-Static Graphene which was one of the only type of Graphene that can super conduct electricity between the interfaces of an electrical joint, no need for solders.

A fter many years of research, I’m still was not convinced that I have discovered all the secrets of why this type of generator produced large amounts of electrical power. I speculated that the power may be coming from the environment or the Cosmos but could not prove my theory until over fifteen years after the first Thermoelectric Generator was assembled. It was prior to 2015 that two scientists discovered that the elusive ghost particle of Neutrinos have mass and electron volts.  The Nobel Prize in Physics 2015 was awarded jointly to Takaaki Kajita and Arthur B. McDonald “for the discovery of neutrino oscillations, which shows that neutrinos have mass”.  Their discovery started a tsunami of research by organizations and scientists around the world with the simple logic that the Neutrinos can be made to produce unlimited pollution-free electrical power. There are many scientists that are skeptical that this is possible but the Neutrino researchers point to the fact that trillions of Neutrinos pass through bodies every second. Harvesting only a small portion of these cosmic rays could produce large amounts of non-polluting energy forever!

T he key to harvesting these Neutrinos is, you guessed it, Graphene wave Isolations as the neutrino’s hit Graphene they produce moving waves of electrons. This type of electron conduction occurs naturally without any outside electronics, although it is measured to be very small. Now take the brilliance of a German Mathematician Dr. Holger Thorsten Schubart the CEO of Neutrino Energy Group who found that by combining hundreds of layers of Graphene and Silicon, these devices can produce large amounts of usable electrical power that is pollution free and limitless. Dr. Schubart has organized scientists around the world to help build energy power devices. In India, scientists are building the PI Car project, a self-charging electrical vehicle using His Power Cube Technology. I’m proud to say that in December 2023, Dr. Schubart has requested the use of my Thermoelectric Electronic Shorted Pulse Width Modulator to be used in his Neutrino Power Devices. Dr. Schubart earliest Patent Application Filed March 7, 2016, US-20180053941-A1

Y et another Neutrino explorer is the late Arthur Manelas who invented a device that is said to operate on Neutrino cosmic rays to produce electrical power. He installed this device in his electric auto and showed the power produced. He also discovered that at times of Solar storms from the Sun his device’s “power out” increased. On April 21, 2021 Dr. Brian Ahern and Jean-Francois Leitner filed a Patent Application, also including the late Inventor Arthur Manelas, US 20220344972 A1.  I was asked by Brian Ahern to help reassemble Arthur Manelas electronics that he disassembled prior to his passing, however I never got the opportunity to work on the device, as Brian searched out help from others.

Y ou can find more information on the above scientists in the Interesting readings section enclosed within this web site.

I t is time to talk about my work in these 24 years of research. I have made many discoveries in these years that I listed in my patent disclosures. The research was all about discovery of why this Thermoelectric Generator produced very large amounts of electrical power. I became convinced that the extra power was somehow coming from the Cosmos as I have contended for many years. The discovery of the Noble Prize winners Takaaki Kajita and Arthur B. McDonald that Neutrinos have mass now convinces me that My suspicions were correct.

I’m now at this point in my research that I know the basis of what makes this technology work and how it can fit into saving our planet from burning up using Carbon based fuels. It is now time that I offer my Patents for licensing to qualified persons and or companies that are able to make my work an everyday reality. “Yes, There are miles yet to go before I sleep”.

Anthony Paul Bellezza